Pipette Filler Instructions

Date：2019-07-30      Categories： Industry news      Views：8277

Rubber pipette filler helps you to release air, draw solution, and precisely release solution from the pipette.
How to safely use rubber pipette filler fill glass and plastic pipettes? please check the followinginstructions

1. Insert the top of the pipette in the bottom of the pipette filler.

2. Release air from the pipette filler by squeezing valve “A” on the top of the pipette filler while simultaneously squeezing the bulb. The amount of air you release is dependent on the size of the pipette you are using-release more air for larger volume pipettes.

3. Insert the tip of the pipette into the solution to be dispensed.

4. Siphon solution into the pipette to the desired level by squeezing valve “S” on the bottom of the pipette filler.

This uses the vacuum created in the bulb to draw solution into the pipette. Avoid to draw solution into the pipette filler.

5. Empty the pipette by squeezing valve “E” on the side tube. It will help to release solution at the desired rate and to the desired level.  

6. It works best to fill the pipette past the zero mark on step 4 (valve “S”) and then draw the level down to the zero mark on step 6 (valve “E”). Once the pipette is filled to the level desired the contents can be dispensed using valve “E”.